asMODus Spruzza 80W Squonk Kit

Sold out

AsMODus comes to the market with their first squonk mod, the innovative Spruzza 80W TC Mod.  The Spruzza is a small, compact device that will hit 80W maximum with a single 18650 battery (sold separately). The Spruzza features stabilized wood doors on each side that can be removed to access the innovative SSS (Smart Siphon System) system for filling, as well as the battery bay. The Spruzza's SSS system is unlike any other squonk system out there.The SSS system utilizes a pump located on the body of the mod that siphons juice through the 510 pin and pumps juice into your bottom feed squonk ready RDA. The internal chamber has a maximum capacity of 4mLs of juice. The SSS system and the battery tray are on opposite sides of the mod so that is the SSS is overfilled and spills, it will not leak into the internals of the mod. The Spruzza is powered by the GX-80-HUT chipset , which supports wattage (power) mode, a full temperature control suite, TFR, TCR, and a Curve mode (Curve allows the user to imitate the abilities of temperature control mode by allowing the user to set 5 different wattage's over time presets for up to 10 seconds.) The screen for the Spruzza Squonk device utilizes an OLED Capacitive Touch Screen that features a bright 5 line display and responsive touch adjustment features. The Spruzza can be controlled with Swipe and Tap touch controls for intuitive and convenient handling. 

Paired with the Spruzza 80W TC Squonk Mod is the AsMODus Fonte RDA, a squonk ready 24mm bottom feed rebuildable dripper atomizer. The Fonte RDA features a two post build deck with a single terminal per post and side-mounted screws. Made from high quality SS316 the Forte also features a 3.5mm juice well and a heat sink on the top cap to prevent heat transfer. The cap utilizes a Delrin wide bore drip tip for maximum cloud intake. The Fonte RDA supports both single coil and dual coil configurations.  Airflow on the forte is easily adjustable with dual adjustable side inlets. The airflow inlets on the sides of the top cap are arched downwards, which channels the airflow to the bottom of the build deck. All the flavor on bottom airflow with out any of the leaking issues. 


How to fill the Spruzza juice box:
1.Remove the juice box
2.Fill juice box with juice
3.Pump it 10 times
4.Reinstall and squonk on!

AsMODus Spruzza Features:

  • GX-80-HUT Chipset
    • Wattage range (Power mode): 5W - 80W
    • Wattage range (TC modes): 5W - 60W
  • 35A Maximum Continuous Output
  • Temperature Control Suite
    • Ni200 Nickel Support/Ti Titanium Support/SS317 & SS316 & SS304 Stainless Steel Support
    • Adjustable TCR/TFR Mode
    • 212 to 572 Degrees Fahrenheit
  • Zinc Alloy Chassis
    • Aluminum Accenting
  • Removable Magnetic Stabilized Wood Doors
    • Access to SSS System for Filling
    • Access to Battery Bay
  • Internal Juice Chamber
    • 4ml Maximum Capacity
    • SSS pre-primed with VG
  • Single 18650 Battery Powered
    • Battery Sold Separately
  • Over sized Single Button Control Face
  • 0.91 Inch Capacitive Touch Screen
    • Displays Essential Data Neatly
    • Requires Electrical Properties of the Human Body To Detect When and Where the Display is Touched
    • Micro USB Port
      • 1A Charging¬†
      • Firmware and Software Upgrade
    • Full Safety Suite of Protections
      • Reverse Polarity Protection/Under-Voltage Protection/High Resistance Protection/Thermal Protection/Over Voltage Protection/Low Resistance Protection/Short Circuit Protection

        AsMODus Fonte RDA Features:

        • 24mm Diameter
          • Two Post Build Deck
          • Single Terminal Per Post
          • 3mm Terminal Per Post
          • Side Mounted Hex Screws
        • Squonk Ready 510 Pin Installed
          • Standard 510 Pin Included
        • 3.5mm Deep Juice Well
        • Double O-Ring Secured
        • PEEK Insulator
        • Dual Adjustable Side Airflow
          • 8.5mm by 2mm Each Airslot
          • Single and Dual Coil Capability
          • Fully Closeable
        • Heat Sink Top Cap and Delrin Insulation
          • Prevents Heat Transfer To Mouth
        • 316 Stainless Steel Construction

        Product Includes:

        • One AsMODus Spruzza 80W TC Squonk Box Mod
        • One Asmodus Fonte 24mm RDA
        • Spare Parts Pack
        • One Pair Prebuilt Coils
        • Two Sized Allen Keys
        • User Manuals